SKU 93853
For technical questions, please call 1-800-444-3353
PAGE 2
SpEcIFIcATIONS
Electrical Requirements 120 V~ / 60 Hz / 1500 W
20 A (Start Up) / 9.5 A (No Load) / 13.0 A (With Load)
Power Cord Type: 82” Long / 14 AWG x 2C
Power Cord Plug Type: 2-Prong / Polarized
Power Switch Type: 2-Position Toggle Switch w/Slider Cover
Blows Per Minute
900 ~ 1800 BPM (Using Variable Speed Dial)
Variable Speed Settings 1-2-3-4-5-6
Handle Types
Fixed Main Rear Handle (7” x 4-1/4” x 1-3/8”)
Rotating Swivel “D” Style Auxiliary Handle (6” x 5” x 1-1/4”)
Included Chisels
Bull Point (13-7/8” Long / Qty. 1)
Spade (1” Wide x 13-7/8” Long / Qty. 1)
Chisel Shank Size
45/64” Diameter
Chisel Retainer
Quick-Release Retainer
Note:
SDS and SDS MAX chisels (both not included) can be used with this Demolition
Hammer.
SAVE THIS MANuAL
You will need this manual for the safety warnings and precautions, assembly,
operating, inspection, maintenance and cleaning procedures, parts list and assembly
diagram. Keep your invoice with this manual. Write the invoice number on the inside of the
front cover. Keep this manual and invoice in a safe and dry place for future reference.
gENERAL SAFETY RuLES
WARNINg! Read all instructions
Failure to follow all instructions listed below may result in electric shock,
fire, and/or serious injury.
The term “power tool” in all of the warnings listed
below refers to your line-operated (corded) power tool or battery-operated
(cordless) power tool.
SAVE THESE INSTRucTIONS
WORK AREA
Keep your work area clean and well lit.
1.
Cluttered benches and dark areas
invite accidents.
Do not operate power tools in explosive atmospheres, such as in the
2.
presence of flammable liquids, gases, or dust.
Power tools create sparks
which may ignite the dust or fumes.
Keep bystanders, children, and visitors away while operating a power tool.
3.
Distractions can cause you to lose control. Protect others in the work area from
debris such as chips and sparks. Provide barriers or shields as needed.
REV 06f
