SKU 96298
for technical questions, please call 1-800-444-3353.
PAGE 10
OPERATiNG iNSTRUCTiONS
NOTE: For additional information regarding the parts listed in the following pages, refer to
the
Parts List & Assembly Diagram.
WARNiNG! Remove the Battery Pack (19) from the tool and set the Rotation Button
(6) to its center, locked, position before making any adjustments, changing acces-
sories, or storing the tool.
battery Pack
(19)
Trigger (12)
Gear box with
Torque Ring (2)
Rotation button (6)
Chuck (1)
To install a screwdriver bit, insert the correct Bit (26) for the application into the
magnetic Bit Adapter (27).
Never insert one of the included bits (26) directly
into the Chuck. A smaller gauge than 1/4” will not be firmly secured and may
result in injury or property damage. With the Chuck (1) pointing away from you,
pull gently on the Chuck sleeve and insert the Bit Adapter into the Chuck. Release
the Chuck sleeve and the Bit Adapter will lock firmly in place. The Chuck accepts
1/4” Hex Shank only. To remove the Bit Adapter (27), reverse the above-mentioned
procedure.
Secure the workpiece in place, using a vise or clamps (not included).
Note: Never change Torque Setting while the Cordless Driver is still rotating, as this can
damage the Cordless Driver.
Selecting an appropriate torque setting (1-24):
1.
2.
3.
