6.
To avoid electrical shock, do not pull or carry the Drywall Screwdriver by its
Power Cord, use the Power Cord as a handle, close a door on the Power
Cord, or pull the Power Cord around sharp corners or edges.
Do not unplug
the Drywall Screwdriver by pulling on the Power Cord. Keep the Power Cord
away from heated surfaces.
7.
To avoid electrical shock, do not handle the Power Cord Plug or the
Drywall Screwdriver with wet hands.
8.
Keep the Handle of the Drywall Screwdriver dry, clean, free from oil and
grease.
It is recommended to use rubber gloves. This will enable better control.
11.
Always turn off the Drywall Screwdriver and unplug it from its electrical
outlet before changing accessories or performing any inspection, mainte-
nance, or cleaning procedures.
13.
WARNING!
People with pacemakers should consult their physician(s)
before using this product. Operation of electrical equipment in close proximity to
a heart pacemaker could cause interference or failure of the pacemaker.
SKU 09624
PAGE 6
10.
Never leave the Drywall Screwdriver unattended when it is plugged into an
electrical outlet.
Turn off the Drywall Screwdriver, and unplug it from its electri-
cal outlet before leaving.
9.
Avoid unintentional starting.
Make sure you are prepared to begin work
before turning on the Drywall Screwdriver.
12.
WARNING!
Some dust created by power sanding, sawing, grinding, drilling,
and other construction activities, contain chemicals known (to the State of Cali-
fornia) to cause cancer, birth defects or other reproductive harm. Some ex-
amples of these chemicals are: lead from lead-based paints, crystalline silica
from bricks and cement or other masonry products, arsenic and chromium from
chemically treated lumber. Your risk from these exposures varies, depending on
how often you do this type of work. To reduce your exposure to these chemicals:
work in a well ventilated area, and work with approved safety equipment, such as
those dust masks that are specially designed to filter out microscopic particles.
(California Health & Safety Code 25249.5, et seq.)
