SKU 94849
For technical questions please call 1-800-444-3353
Page 4
using the Battery Charger
note:
Battery will not reach full charge the first time it is charged. Allow several
cycles (operation followed by recharging) before the Battery will become fully
charged.
note
: Performance of the charger may vary depending on variations in local line
voltage. Extension cord usage may also affect tool performance.
note:
During recharging, the Battery will become slightly warm to the touch.
This is normal and not a cause for concern. Do not keep the Battery or
charger in an environment of extreme heat or cold. They will work best at
room temperature.
Battery temperature Warning:
Warning:
Battery explosion may cause serious personal or property injury in-
cluding death. Charge the Battery only within a 50° to 100° F. temperature range.
Lower temperatures may inhibit charging. Higher temperatures increase chance
of battery failure, including explosion.
Always allow a battery that is warm from use to cool before charging.
Battery Charger safety:
1. Charge the Battery only with the included charger. Use of other chargers
may cause battery failure including explosion.
2. Ensure that the Battery Charger is connected only to a 120 VAC, 60 Hz
power supply that includes a circuit breaker.
Cordless tool safety:
1. Before inserting the Battery Pack into the tool, check to be sure that the
Trigger operates properly, and returns to the OFF position when released.
2. Use only fully charged Battery Pack specifically designed for this tool. Insert
the Battery Pack into the handle. Ensure that the Battery Lock is engaged
securely holding the Battery Pack in place.
Warning: the warnings, cautions, and instructions discussed in this instruction
manual cannot cover all possible conditions and situations that may occur.
it must be understood by the operator that common sense and caution are
factors which cannot be built into this product, but must be supplied by the
operator.
