Page 5
SKU 94422
1.
Remove the Cap from the Steam Cleaner by twisting it off. Next fill it with tap water
(demineralized water preferred). Replace Cap.
Steam Cleaner Body
2.
Chose the attachment you want to use and attach it to the Nozzle (31) (see fig.1).
Next insert the plastic Nozzle (31) into the Steam Cleaner Body by pushing it into the
twisting it to lock it into place (see fig. 2 below).
Note: All three of the attachments are press fit onto the Nozzle (31)(see fig.1 and fig 3).
3.
Plug in the Steam Cleaner. Turn the Steam Cleaner on using the On/Off Switch to emit
continuous steam. It will take 30-45 seconds before steam will come out.
4.
Once the water tank is empty, the steam will stop. Immediately unplug the line cord
and turn off the Steam Cleaner; then refill the water tank.
5.
When finished using the Steam Cleaner, unplug the line cord, then empty the Water
Tank. Let the Steam Cleaner cool before you place it on any surfaces that may burn.
Maintenance
1.
When preparing to store the unit, disconnect and clean all accessories. Remove and
empty the Water Tank.
2.
Store the unit in a clean and dry location.
Operation
Cap
On/Off Switch
Fig. 1
Fig. 2
Fig.3
All accessory steam orifices must be kept clean and open to avoid damaging the Steam
Cleaner. You can use the Steam Cleaning Tip to clean out the brush attachments (see
the photo page 4).
3.
