Page 2
SKU 94422
Specifications
ITEM
DESCRIPTION
Power
120 VAC, 60 Hz
Line Cord
3-wire, 3-prong grounding plug, 17 AWG, UL Listed
Steam Temperature 205.2 degrees F at the tip
Burst Length
3 seconds
Weight
3.8 lbs.
Accessories
3 - Nozzles
1 - Brush Kit
1 - Squeegee Attachment
1 - Extended Bent Nozzle
1 - Blow Mold Case
Save This Manual
You will need the manual for the safety warnings and precautions, assembly instructions,
operating and maintenance procedures, parts list and diagram. Keep your invoice with this
manual. Write the invoice number on the inside of the front cover. Keep the manual and
invoice in a safe and dry place for future reference.
General Safety Warnings and Precautions
WARNING: When using tool, basic safety precautions should always be followed to re-
duce the risk of personal injury and damage to equipment.
Read all instructions before using this tool!
1.
Keep work area clean. Cluttered areas invite injuries.
2.
Observe work area conditions. Don’t expose this product to rain. Keep work area
well lighted. Do not use electrically powered tools in the presence of flammable gases
or liquids.
3.
Keep children away. Children must never be allowed in the work area. Do not let
them handle machines, tools, or extension cords.
4.
Store idle equipment. When not in use, tools must be stored in a dry location to
inhibit rust. Always lock up tools and keep out of reach of children.
5.
Do not force tool. It will do the job better and more safely at the rate for which it was
intended. Do not use inappropriate attachments in an attempt to exceed the tool
capacity.
6.
Use the right tool for the job. Do not attempt to force a small tool or attachment to do
the work of a larger industrial tool. There are certain applications for which this tool
was designed. Do not modify this tool and do not use this tool for a purpose for which it
was not intended.
7.
Dress properly. Do not wear loose clothing or jewelry as they can be caught in
moving parts. Protective, electrically nonconductive clothes and nonskid footwear are
recommended when working. Wear restrictive hair covering to contain long hair.
8.
Use eye and ear protection. Always wear ANSI approved impact safety goggles.
,
15.7 Amps
Warm up time
30 seconds (water to steam)
Tank capacity
16 FL. OZ.
Two round brushes
One rectangle brush
One steel cleaning tip
One plastic nozzle attachment
4.15 LBS.
Dimensions
17” long x 16” wide
Maximum Steam Temperature: 210° F.
REV 06/06
