background image

Page 4

SKU 94280

For technical questions, please call 1-800-444-3353.

Use safety equipment.  Wear eye protection when assembling this product. 

  

Non-skid safety shoes must be used for appropriate conditions.

TOOL USE AND CARE

Disconnect the Power Cord Plug from the power source before making any 
adjustments, changing accessories, or storing the Floor Machine.  

Such pre-

ventive safety measures reduce the risk of starting the unit accidentally.

Store idle equipment out of reach of children and other untrained persons.  

Electrically powered products are dangerous in the hands of untrained users.

Check for misalignment or binding of moving parts, breakage of parts, and 
any other condition that may affect this product’s operation.  If damaged, have 
the Floor Machine serviced before using.

  Many accidents are caused by poorly 

maintained equipment.

SERVICE

Service  must  be  performed  only  by  qualified  repair  personnel.   

Service  or 

maintenance performed by unqualified personnel could result in a risk of injury.

When servicing this product, use only identical replacement parts.  Follow 
instructions in the 

“Inspection, Maintenance, And Cleaning” 

section of this 

manual. 

 Use of unauthorized parts or failure to follow maintenance instructions 

may create a risk of electric shock or injury.

SPECIFIC SAFETY RULES

Maintain labels and nameplates on the Floor Machine.  

These carry important 

information.  If unreadable or missing, contact Harbor Freight Tools for a replace-
ment.

Wear ANSI-approved safety impact eye goggles and non-slip foot-

wear when using the Floor Machine.   

Using personal safety devices 

reduce the risk for injury.

Maintain a safe environment.  

Keep the area well lit.  Make sure there is adequate 

surrounding space.  Always keep the area free of obstructions, grease, oil, trash, 
and other debris.  Do not use an electrically powered product in areas near flam-
mable chemicals, dusts, and vapors.

Never leave the Floor Machine unattended when it is plugged into an electrical 
outlet.  

Turn off the Floor Machine and unplug the tool before leaving.

Carefully inspect the condition of the Floor Machine before use, and check 
the tool continually during use.  

If any damage is noted, stop immediately and 

repair or replace the Floor Machine.

5.

1.

2.

3.

1.

2.

1.

2.

3.

4.

5.

Содержание 94280
















Отзывы: