4.
Position the Saw Blade (59, 60) of the Jigsaw about 1/2” from the beginning cut line
on the workpiece. Do not allow the Saw Blade to come in contact with the workpiece.
5.
Turn the Laser Switch (4) to its “ON” position, and align the laser beam with the
cut line on the workpiece. (See Figure D.)
6.
Squeeze the Trigger (21) to turn on the Jigsaw. If operating the Jigsaw for an
extended period of time, you may wish to depress the Trigger Lock (61) to lock the
Trigger in its “ON” position. (See Figure D.)
Caution: Always check to make sure that the area under the workpiece is free of
any obstruction before making the cut.
7.
Allow the Saw Blade (59, 60) to stroke at full speed before feeding it into the
workpiece.
8.
Make sure to hold the Jigsaw firmly with both hands, as torque from the Motor will
cause the tool to twist. Then, slowly make the cut . (See Figure D.)
9.
When finished, release the Trigger (21) to stop the Jigsaw. Wait until the Saw Blade
(59, 60) stops completely. Turn the Laser Switch (4) to its “OFF” position. Then,
remove the Jigsaw from the workpiece.
10.
Make sure to store the Jigsaw and its accessories in a dry, clean location out of
reach of children and other unauthorized people.
INSPECTION, MAINTENANCE, AND CLEANING
1.
WARNING! Always turn the Trigger (21) to its “OFF” position, and
unplug the Power Cord (43) from its electrical outlet before performing any
inspection, maintenance, or cleaning.
2.
Before each use: Inspect the general condition of the Jigsaw. Check for mis-
alignment or binding of moving parts, cracked or broken parts, bent Saw Blade
(59, 60), damaged Power Cord (43), and any other condition that may affect its
safe operation. If abnormal noise or vibration occurs, have the problem cor-
rected before further use.
Do not use damaged equipment.
3.
Daily: With a clean cloth, remove all dirt, grease, and oil from the Jigsaw. Do not
immerse the Jigsaw in any liquids.
4.
CAUTION! All maintenance, service, or repairs not listed in this
manual are only to be attempted by a qualified service technician.
SKU 92772 For technical questions, please call 1-800-444-3353
PAGE 15
