2.
IMPORTANT: When installing a Saw Blade (59, 60), make sure the teeth of the
Saw Blade face to the
front of the tool. (See Figure E.)
3.
Slide the Blade Guard (9) up to expose the Blade Guide Assembly (38).
(See Figure E.)
4.
Slightly loosen the two Hex Screws (16) on the Blade Guide Assembly (38).
(See Figure E.)
5.
Insert the Saw Blade (59, 60) upward into the Blade Guide Assembly (38), and
retighten the two Hex Screws (16) to secure the Saw Blade in place. Then, make
sure to lower the Blade Guard (9) to its original position. (See Figure E.)
To Install Batteries For The Laser Guide:
1.
Remove the Battery Compartment Lid (57) on the front of the Jigsaw to
expose the Battery Compartment. Install two “AAA” size Batteries (not included)
in the Compartment, making sure to match the polarity of contacts as indicated in
the Compartment. Then, reattach the Battery Compartment Lid.
(See Figure F, next page.)
To Adjust The Bevel Of Cut:
1.
The Base Plate (41) can be tilted to cut any angle between 0 and 45 degrees
right and left. To do so, loosen the Hex Screw (16). Rotate the Base Plate right
or left to the desired angle of cut. Then, retighten the Hex Screw (16).
(See Figure G, next page.)
SKU 92772 For technical questions, please call 1-800-444-3353
PAGE 13
