background image

in its “OFF” position, the Battery (40) is removed from the Impact Driver, and the Charger
(46) is unplugged from its electrical outlet prior to making any adjustments to the tool.
(See Figure A.)

2. Lock Sleeve (9): Accepts the 1/4” 

shank diameter Double End Screwdriver (39), 1/4”

Socket (42), 5/16” Socket (43), 3/8” Socket (44), and 15/32” Socket (45).  To install the
Screwdriver or Sockets with the Impact Driver pointed away from your body, pull back on
the Lock Sleeve.  Insert the shank of the Screwdriver or Socket all the way into the Lock
Sleeve.  Then, release the Lock Sleeve to hold the Screwdriver or Socket in place.
(See Figure A.)

SKU 92472         For technical questions, please call 1-800-444-3353         PAGE 7

3. Trigger (34): The Trigger is operated 

manually simply by squeezing the Trigger to turn on

the Impact Driver and releasing pressure on the Trigger to turn off the Driver.  The Trigger
features a Trigger Lock for continuous running of the Impact Driver.  To set the Impact
Driver in a continuous run mode, squeeze the Trigger and depress the Trigger Lock.
Then, release pressure on the Trigger.  The Impact Driver will continue to run.  To turn off
the Impact Driver, squeeze and let up on the Trigger.  (See Figure A.)

4. Forward/Reverse Lever (37): The Forward/Reverse Lever allows you to change the

rotational direction of the Impact Driver.  To change the rotational direction, make sure
the Impact Driver is at a complete stop.  While holding the tool in your hand, for a 

clockwise

rotation, move the Lever to the 

right.  For a counterclockwise rotation, move the Lever to

the

 left.  (See Figure A.)

LOCK SLEEVE (9)

FORWARD/REVERSE LEVER (37)

TRIGGER (34)

TRIGGER LOCK

BATTERY (40)

CHARGER (46)

FIGURE A

TO CHARGE THE IMPACT DRIVER

1. NOTE: The Battery (40) requires charging.   (See Figure A.)

2. When the Battery (40) requires recharging, a 1- 1-1/2 hour charge allows the tool to

Содержание 92472












Отзывы: