manualshive.com logo in svg
background image

SKU 91511   

 

 

 

PAGE 10

 

 
 

 

 

 

 

 

 

25. 

        WARNING!  People with pacemakers should consult their physician(s)   

 

before using this product.  Electromagnetic fields in close proximity to a heart    

 

pacemaker could cause interference to or failure of the pacemaker.

26.         

     WARNING!  Some dust created by power sanding, sawing, grinding, 

drilling, and other construction activities, contain chemicals known (to the State 
of California) to cause cancer, birth defects or other reproductive harm.  Some 
examples of these chemicals are: lead from lead-based paints, crystalline silica 
from bricks and cement or other masonry products, arsenic and chromium from 

 

 

 

 

 

 

chemically treated lumber.  Your risk from these exposures varies, depending on 
how often you do this type of work.  To reduce your exposure to these chemicals: 
work in a well ventilated area, and work with approved safety equipment, such as 
those dust masks that are specially designed to filter out microscopic particles.  
(California Health & Safety Code 25249.5, et seq.)

27. 

The warnings, precautions, and instructions discussed in this manual 
cannot cover all possible conditions and situations that may occur.  
It must 
be understood by the operator that common sense and caution are factors which 
cannot be built into this product, but must be supplied by the operator.

ASSEMBLY INSTRUCTIONS

NOTE: For additional references to the parts listed in the following pages, refer to the 
Assembly Diagram on page 17.

To Remove And Install The Saw Blade:

1. 

         WARNING!   Prior to performing any assembly procedures, make sure   

 

the Power Cord (17) of the Wet Tile Saw is unplugged from its electrical  

 

 

outlet.  Also, make sure the unit has completely cooled and wear heavy  

 

 

duty work gloves.

2. 

Open the Left Side Cutting Table (26) to expose the old Saw Blade (6).

 

(See Figure D, next page.)

3. 

Using the accessory Wrench (33), remove the Blade Lock Nut (27) by unscrewing 

 

it in a 

clockwise direction.  (See Figure D.)

4. 

Once the Blade Lock Nut (27) is removed, remove the Outer Washer (28).

 

(See Figure D.)

5. 

While wearing heavy duty work gloves to avoid accidental cuts, remove the old

Содержание 91511



















Отзывы: