Chicago Electric 90880, Руководство по сборке и эксплуатации

Страница: 9 / 14

Page 9 SKU 90880
MOUNTING THE SIDE HANDLE
For ease of use and more spraying control, it may be desirable to mount the Side Handle
(28) to the Housing (27). It can be mounted to either the left or right side of the Housing
(27).
1. To mount the Side Handle (28), remove the rubber cap covering the threaded
connector (on either side of the housing).
2. Screw the Side Handle into the housing until securely tightened.
SPRAYING TECHNIQUES
The following are some general tips while spray painting. Also refer to the illustrations
below.
•
Keep the Spray Gun level and perpendicular to the surface being painted.
•
Keep the Nozzle 10 to 12 inches from the spraying surface.
•
Spray evenly: side-to-side, up and down, with smooth and even strokes at one speed.
•
Spraying at an angle will cause drips.
• Move the Spray Gun using a sweeping arm motion, rather than wrist motion.
•
Never start or stop spraying while aimed at the surface being painted.
•
Spraying strokes at a fast speed will produce a light coat. Strokes at a slow speed will
produce a heavier coat.
•
Spray only one coat at a time. Allow paint to properly dry before applying another coat.
•
Do not tip the Spray Gun more than 45 degrees while spraying.