Page 2
SKU 90880
Specifications
Item Description
Power Consumption Battery, 18 VDC, 1.7 Amp Hours
Canister Capacity
15 oz. (500 ml)
Battery Capacity
15 to 20 containers per full battery charge
Battery Type
18 VDC, Ni-Cad, 1.7 AH
Battery Charger
Class II, 120 VAC, 60 Hz; Output: 24 VDC, 200 mA
Delivery
10 oz. (300 ml) per minute (water) (maximum)
Viscosity
30 DIN-sec (maximum)
Stainless Steel
Nozzles
2 – Round jet, 0.019” (dia.) 0.5 mm; For lighter
body and sealer liquids
1 – Angle Nozzle Adapter, 0.023” (dia.) 0.6 mm;
Slightly flexible; For latex, stain, and oil base paint
Spray Functions
4 settings, adjustable
Dimensions
10 (H) x 3-1/4 (W) inches; At canister 9-5/8 (L) inches;
Side Handle: 4 (L) inches
Weight 4.6
lbs.
Accessories
Blow mold case
Viscosity cup with hanger
Cleaning needle
Nozzle Extension
Save This Manual
You will need the manual for the safety warnings and precautions, assembly instructions,
operating and maintenance procedures, parts list and diagram. Keep your invoice with this
manual. Write the invoice number on the inside of the front cover. Keep the manual and
invoice in a safe and dry place for future reference.
General Safety Warnings and Precautions
WARNING: When using tool, basic safety precautions should always be followed to re-
duce the risk of personal injury and damage to equipment.
Read all instructions before using this tool!
1.
Keep work area clean. Cluttered areas invite injuries.
2.
Observe work area conditions. Do not use machines or power tools in damp or wet
locations. Don’t expose to rain. Keep work area well lighted. Do not use electrically
powered tools in the presence of flammable gases or liquids.
3.
Keep children away. Children must never be allowed in the work area. Do not let
them handle machines, tools, or extension cords.
4.
Store idle equipment. When not in use, tools must be stored in a dry location to
inhibit rust. Always lock up tools and keep out of reach of children.
5.
Use the right tool for the job. Do not attempt to force a small tool or attachment to
do the work of a larger industrial tool. There are certain applications for which this tool
was designed. It will do the job better and more safely at the rate for which it was
intended. Do not modify this tool and do not use this tool for a purpose for which it
was not intended.
6.
Dress properly. Do not wear loose clothing or jewelry as they can be caught in
moving parts. Protective, electrically non-conductive clothes and non-skid footwear
are recommended when working. Wear restrictive hair covering to contain long hair.
Содержание 90880
Страница 14: ...Page 14 SKU 90880 Assembly Drawing ...
