SKU 67080
For technical questions, please call 1-800-444-3353.
Page 13
Functions
Figure 1
Saw Blade (39)
Safety Button
Base
Plate
Lock
(58)
Base
Plate
(28)
Base Plate
(28)
Height Lock
Lever (23)
Spindle Lock
Button (18)
Protective Guard (35)
Protective Guard (35)
Dust
Collector
Port
Trigger (67)
Base
Guard
(43)
Flange (40)
Spindle (37)
Trigger (67)
operaTing inSTruCTionS
read the enTire imporTanT
SaFeTY inFormaTion
section at the beginning of this
manual including all text under
subheadings therein before set
up or use of this product.
Tool Set up
To preVenT
SeriouS injurY
From aCCiDenTal
operaTion:
Turn the power Switch of the
tool off and unplug the tool
from its electrical outlet
before performing any
inspection, maintenance, or
cleaning procedures.
Changing the blade
Place the Saw on its side on a flat
1.
surface.
While depressing the Spindle Lock
2.
Button (18), insert the Spanner (72)
in two of the holes on the Flange
(40) and rotate counterclockwise to
unthread the Flange. Release the
Spindle Lock Button and remove the
Blade (39).
Replace the old Blade with a new
3.
Blade, making sure that the Saw
teeth and arrow on the Blade point in
the same direction as the arrow on
the machine body.
Depress the Spindle Lock Button and
4.
re-thread the Flange in place. Tighten
with the Spanner.
Check that the Saw Blade turns
5.
freely.
adjusting the Cutting Height
Place the Saw, Blade side down on
1.
the floor, positioned near the door to
be trimmed.
Release the Height Lock Lever (23) if
2.
it is not already released.
