background image

SKU 66835 

For technical questions, please call 1-800-444-3353. 

Page 6

ing point. The grounding point will 

vary depending on where the Power 

Inverter is installed. In a vehicle, 

connect the ground to the chassis of 

the vehicle. In a boat, connect to the 

boat’s grounding systems. If using a 

separate battery, not attached to a 

vehicle or boat, connect the ground to 

the earth. 
Connect the cables (not included) 

3. 

to the (Positive) red and (Negative) 

black Power Terminals on the side of 

the Inverter. 

note:

 The connecting cables must have 

1/2” ring terminals at one end for 

connecting to the power terminals of 

the Inverter, and alligator clips with 

insulated grips on the other end for 

connecting to the battery.
Apply the parking brake to the vehicle 

4. 

connected to the battery. Place the 

transmission in “Park” for an auto-

matic transmission, or in “Neutral” for 

a manual transmission. Start the car 

engine.
Attach the battery positive (red) termi-

5. 

nal first and then the negative (black) 

terminal. (When disconnecting, first 

remove the negative terminal then 

the positive terminal connection.)
Turn on the Inverter’s Power Switch.

6. 

The green Power LED of the Inverter 

will light up. 

note:

 If the red Over-load or Over-temp 

LEDs light up instead, check the 

Troubleshooting Tips section near 

the end of this manual to correct the 

issue before continuing.
To power a device or appliance:

7. 

With the device or 

a. 

appliance 

switched off, plug it into one of the 

Power Outlets on the Power Inverter. 

Repeat for a second device or 

b. 

appli-

ance if needed.
Turn on the devices and/or 

c. 

appli-

ances. 

After use, unplug the appliance, turn 

8. 

off the car engine if it is running, and 

remove the cables from the battery 

and the Power Inverter.

note:

 The total wattage of all items 

plugged into the Power Inverter must 

not use more than 800 watts during 

continuous operation, otherwise the 

Inverter may overload.

note:

 If an alarm sound is heard, turn off 

the appliances and check the Trou-

bleshooting Tips section near the end 

of this manual to correct the issue 

before continuing.

Caution:

 Some rechargeable appliances 

may damage the Power Inverter 

or the appliance.  When first using 

a rechargeable device, check the 

inverter’s temperature for the first 10 

minutes.  If it becomes abnormally 

hot, do not use this device with the 

Inverter.

Caution:

  It is recommended that the ve-

hicle be running when you first con

-

nect the Power Inverter. Thereafter 

the engine can be on or off. If you run 

the Power Inverter with the engine 

off it is recommended that you start 

and run the engine every hour for at 

least 10 minutes to recharge the bat-

tery.  Doing this will help prevent any 

unexpected shutdown of the equip-

ment.  This will also help ensure that 

there will be enough battery power 

to start the vehicle.

  due to the risk 

of carbon monoxide inhalation, do 

not run the vehicle’s engine within 

an enclosed area.

Содержание 66835











Отзывы: