Page 11
SKU 65817
For technical questions, please call 1-800-444-3353.
trigger (36):
Squeeze the Trigger to turn the Impact Wrench on and release pressure
on the Trigger to turn the Impact Wrench off.
Forward/reverse switch (32):
The Forward/reverse Switch allows you to change
the rotational direction of the Impact Wrench. For a clockwise rotation, move
the Forward/reverse Button to the right. For a counterclockwise rotation, move
the Forward/reverse Button to the left. To avoid damage to the Impact Wrench,
always wait until the tool completely stops before changing rotational directions.
1/2” drive impact head (7):
The 1/2” Impact Head securely holds a socket.
Battery (37):
The power source for the Impact Wrench is a rechargeable, 19.2 VDC
Battery. Make sure to follow all safety precautions when working with the Battery.
Charger (39):
The Charger is powered by plugging the Power Plug into a 120 volt,
grounded, electrical outlet. NeVer attempt to power the Charger with any other
electrical source other than a 120 volt, grounded electrical outlet.
to 120 Volt,
grounded,
electrical
outlet.
Battery
(37)
Charger
(39)
impact head
(7)
trigger (36)
Forward/reverse
switch (32)
Battery (37)
Figure a
Charging
The Battery (37) must be charged for
1.
5 hours
, prior to the first use of the Impact
Wrench.
After first use, the Battery (37) should only be recharged when the performance
2.
of the Impact Wrench begins to diminish. Severe heat is destructive to batteries;
the more heat generated, the faster the battery will lose power. A battery that
gets too hot can be permanently damaged. Never discharge the battery by con-
tinuing to pull the Trigger after the tool’s performance begins to diminish. Stop
the tool, re-charge the battery, and use the fresh battery for optimal performance.
reV 09a
