Item 65766
For technical questions, please call 1-888-866-5797.
Page 12
General Operating Instructions
1. Plug the Body Saw into a
grounded 120V electrical outlet.
2. With one hand holding the casing
of the Body Saw; push the Safety
(36) forward and squeeze the
Throttle (20) to power the Blade.
3. Contact the workpiece and make
the desired cut. Do not push
on the Saw; allow it to make
the cut at its intended pace.
4. When the cut is finished; remove
the Blade from the workpiece
and release the Throttle. Do
not set the Saw down until the
Blade has stopped moving.
5. To prevent accidents, turn off the
tool and disconnect its power supply
after use. Clean, then store the tool
indoors out of children’s reach.
