7.
Use eye and ear protection
. Always wear ANSI approved impact safety goggles. Wear a full
face shield if you are producing metal filings or wood chips. Wear an ANSI approved dust mask
or respirator when working around metal, wood, and chemical dusts and mists.
8.
Do not overreach
. Keep proper footing and balance at all times. Do not reach over or across
running machines.
9.
Maintain tools with care
. Keep tools sharp and clean for better and safer performance.
Follow instructions for lubricating and changing accessories. Inspect tool cords periodically and,
if damaged, have them repaired by an authorized technician. The handles must be kept clean,
dry, and free from oil and grease at all times.
10.
Disconnect power
. Unplug tool when not in use.
11.
Remove adjusting keys and wrenches
. Check that keys and adjusting wrenches are
removed from the tool or machine work surface before plugging it in.
12.
Avoid unintentional starting
. Be sure the switch is in the Off position when not in use and
before plugging in. Do not carry any tool with your finger on the trigger, whether it is plugged in
or not.
13.
Stay alert
. Watch what you are doing; use common sense. Do not operate any tool when you
are tired.
14.
Check for damaged parts
. Before using any tool, any part that appears damaged should be
carefully checked to determine that it will operate properly and perform its intended function.
Check for alignment and binding of moving parts; any broken parts or mounting fixtures; and
any other condition that may affect proper operation. Any part that is damaged should be
properly repaired or replaced by a qualified technician. Do not use the tool if any switch does
not turn On and Off properly.
15.
Guard against electric shock
. Prevent body contact with grounded surfaces such as pipes,
radiators, ranges, and refrigerator enclosures.
16.
Replacement parts and accessories
. When servicing, use only identical replacement parts.
Use of any other parts will void the warranty. Only use accessories intended for use with this
tool. Approved accessories are available from Harbor Freight Tools.
17.
Do not operate tool if under the influence of alcohol or drugs
. Read warning labels on
prescriptions to determine if your judgment or reflexes are impaired while taking drugs. If there
is any doubt, do not operate the tool.
18.
Use proper size and type extension cord
. If an extension cord is required, it must be of the
proper size and type to supply the correct current to the tool without heating up. Otherwise, the
extension cord could melt and catch fire, or cause electrical damage to the tool. This tool
requires use of an extension cord of
0 to 10 amps
capability (up to 50 feet), with wire size rated
at
18 AWG
. Longer extension cords require larger size wire. If you are using the tool outdoors,
use an extension cord rated for outdoor use. (signified by “WA” on the jacket).
19.
Maintenance
. For your safety, service and maintenance should be performed regularly by a
qualified technician.
20.
Make certain area is clear of rocks and debris before starting the Electric Grass
Trimmer.
21.
Do not start the Trimmer while it is laying down or upside down.
22.
Make certain that the Guard is always between you and the Nylon Line.
23.
Never stop the Nylon Line with your hands.
Always let it come to a complete stop
before handling or doing any maintenance.
#47944
Page 3
