Page 8
For technical questions, please call 1-888-866-5797.
46092
Common Problems and Remedies
1.
Irregular Darkening Or Dimming
a. Headband has been set unevenly on both sides of helmet (unequal distances from the eyes to filter’s lens).
b. Reset Headband to reduce difference in distances to filter, if necessary.
2.
Auto-Darkening Filter Does Not Darken Or Flickers
a. Front Lens Cover is soiled or damaged (change the cover).
b. Sensors are soiled (clean surface of the sensors).
c. Welding current is too low (turn Sensitivity Adjustment Knob to the “MAX” position, if necessary).
3.
Slow Response
a. Operating temperature is too low (do not use at temperatures below 14° F).
4.
Poor Vision
a. Front/Inside Lens Cover and/or Filter soiled (change it).
b. Insufficient ambient light.
c. Shade number is incorrectly set (reset shade number).
5.
Welding Helmet Slips
a. Headband is not adjusted properly (must be lowered).
Stop using the Helmet immediately if any of the mentioned problems cannot be corrected.
SAFETY
OPERA
TION
MAINTENANCE
SPECIFICA
TIONS
