Page 4
SKU 37793
For technical questions, please call 1-800-444-3353.
tool uSe And cARe
use clamps (not included) or other practical ways to secure and support the workpiece
to a stable platform.
Holding the work by hand or against your body is unstable and may
lead to loss of control.
do not force the tool. use the correct tool for your application.
The correct tool will
do the job better and safer at the rate for which it is designed.
do not use the power tool if the Power Switch does not turn it on or off.
Any tool that
cannot be controlled with the Power Switch is dangerous and must be replaced.
disconnect the Power cord Plug from the power source before making any
adjustments, changing accessories, or storing the tool.
Such preventive safety
measures reduce the risk of starting the tool accidentally.
Store idle tools out of reach of children and other untrained persons.
Tools
are dangerous in the hands of untrained users.
Maintain tools with care. Keep cutting tools sharp and clean.
Properly
maintained tools with a sharp cutting edge are less likely to bind and are easier
to control. Do not use a damaged tool. Tag damaged tools “Do not use” until
repaired.
check for misalignment or binding of moving parts, breakage of parts, and any
other condition that may affect the tool’s operation. if damaged, have the tool
serviced before using.
Many accidents are caused by poorly maintained tools.
use only accessories that are recommended by the manufacturer for your
model.
Accessories that may be suitable for one tool may become hazardous
when used on another tool.
SeRVice
Tool service must be performed only by qualified repair personnel.
Service or
maintenance performed by unqualified personnel could result in a risk of injury.
When servicing a tool, use only identical replacement parts. Follow instructions
in the
“Inspection, Maintenance, And Cleaning”
section of this manual.
Use of
unauthorized parts or failure to follow maintenance instructions may create a risk of electric
shock or injury.
SPeciFic SAFetY RuleS FoR tHe Plunge RouteR
Hold tool by the insulated gripping handles when performing an operation
where the cutting tool may contact hidden wiring or its own cord.
Contact with
“live” wire will make exposed metal parts of the tool “live” and shock the operator.
this Router has sharp, fast-moving parts. Misuse can cause severe injury.
Follow the safety instructions.
1.
2.
3.
4.
5.
6.
7.
8.
1.
2.
1.
2.
