reflexes are impaired while taking drugs. If there is any doubt, do not attempt to
use this product.
5.
USE EYE, BREATHING, HEARING PROTECTION.
Wear ANSI approved
safety impact eye goggles and an ANSI approved full face shield when using
this product. Use an ANSI approved dust mask or respirator if the operation
produces excessive dust. Also, wear ANSI approved hearing protection. ANSI
approved safety impact eye goggles, full face shield, dust masks, respirator, and
hearing protectors are available from Harbor Freight Tools.
6.
DRESS SAFELY.
Do not wear loose clothing or jewelry, as they can become
caught in moving parts. Wear a protective hair covering to prevent long hair from
becoming caught in moving parts. If wearing a long-sleeve shirt, roll sleeves up
above elbows.
7.
DO NOT OVERREACH.
Keep proper footing and balance at all times to prevent
tripping, falling, back injury, etcetera.
8.
INDUSTRIAL APPLICATIONS MUST FOLLOW OSHA REQUIREMENTS.
9.
STAY ALERT.
Watch what you are doing at all times. Use common sense. Do
not use this product when you are tired or distracted from the job at hand.
10.
CHECK FOR DAMAGED PARTS.
Before using this product, carefully check that
it will operate properly and perform its intended function. Check for damaged
parts and any other conditions that may affect the operation of this product.
Replace or repair damaged or worn parts immediately.
11.
REPLACEMENT PARTS AND ACCESSORIES:
When servicing, use only
identical replacement parts. Only use accessories intended for use with this
product. Approved accessories are available from Harbor Freight Tools.
12.
MAINTAIN THIS PRODUCT WITH CARE.
Keep this product clean, dry, and keep
all cutting bits and chisels sharp for better and safer performance.
13.
MAINTENANCE:
For your safety, service and maintenance should be performed
regularly by a qualified technician.
14.
USE THE RIGHT TOOL FOR THE JOB.
Do not attempt to force a small tool
or attachment to do the work of a larger industrial tool. There are certain
applications for which this tool was designed. It will do the job better and more
safely at the rate for which it was intended. Do not modify this tool, and do not
use this tool for a purpose for which it was not intended.
15.
WARNING:
The warnings, precautions, and instructions discussed in this manual
SKU 02957
PAGE 3
