11
8
Changing of capsule
This microphone has a modular design. To change or replace a capsule, Open the grill to
pull out and plug in the capsule as shown in the following figure.
Operating instruction
1.Before operation, please check and make sure that transmitter & receiver are of matching
frequency or frequency group.
2.To switch on the microphone, put the switch to "ON" position. The green LED indicator will
light onto indicate that battery is fresh. When RED LED lights on, it indicates that battery is
weak, thus a replacement is necessary.
3.For best result, alkaline battery is recommended. Please remove the battery if the
transmitter is not to be used for a longer period.
4.When necessary, mic capsule could be replaced by pulling out and plugging in the new one,
either dynamic or condenser for SQ-916 / SQ-316.
UHF Beltpack Transmitter
SM-5016
Parts & Functions
Antenna
Battery weak / audio mute indicator
Audio mute switch
Mini-XLR connector
Power ON / OFF switch
LCD display
Charging port
Cover release button
Charging contacts
Lavalier microphone
Mic clip
12
13
14
16
15
14
13
12
SET
UP
DOWN
GT
MT
15
16
Battery installation
SM-5016 uses 2 pieces of " AA " size batteries (Alkaline battery is recommended ). To
install or remove the batteries, press the release buttons at the edges of the transmitter to
open or close the cover as illustrated below.
9
8
7
10
11
