1
SM-5016
UHF Belt-pack Transmitter
Parts and functions
1.
Antenna
2.
Battery weak/audio mute indicator
3.
Audio mute switch
4.
Audio input connector (mini XLR)
5.
LCD
6.
Charging port
7.
Cover release button
8.
Power button
9.
High-impedance gain control (GT)
10.
Low-impedance gain control (MT)
11.
Setting button
12.
Up button
13.
Down button
14.
Battery compartment
15.
Charging contacts
Battery installation & indicator
●
►
○
●
When the transmitter is switched ON, a red
LED
②
will blink once to denote the batteries
installed are in good condition.
If the LED remains illuminated, it means the
batteries are weak and require replacement.
This transmitter requires 2 x AA batteries to
operate.
To install, remove the battery cover and slide
the batteries into the battery compartment &
replace the battery cover.
Note
: Batteries contain a corrosive acid that may leak and damage the transmitter when stored for a long
period. Batteries should be removed from the transmitter before storing without use for more than 4 weeks.
8
12
9
11
10
13
14
15
15
1
2 3
4
6
5
7
