GAIN setting (GT/MT)
Gain control is an adjustable design that enables user to set different output levels. GT is for
the use of instrument with high impedance, such as guitar while MT is for the use of low
impedance such as lavalier or headset microphone.
10
11
Antenna
Battery weak indicator
Audio mute switch
Mini-XLR connector
Power ON / OFF switch
LCD display
Charging port
Cover release button
Charging contacts
Lavalier microphone
Mic clip
12
13
14
16
15
14
13
12
SET
UP
DOWN
GT
MT
15
16
Making changes to various settings in SQ-7100
3. Making changes to Sensitivity Level:
Use UP or DOWN button to go to the SENS SET page.
Press UP or DOWN button to increase or decrease the Sensitivity Level of the transmitter.
The MAX level is 4 and the MIN level is 1.
When a desired sensitivity level has been selected for your application, it will be
automatically saved and stored in the Memory.
Remark : When selecting Sensitivity level, please keep in mind that Level 1 is for
close proximity singing purposes whereas Level 4 is for use of transmitter on
tripod mount for speech purposes. When Level 4 setting is used for close
proximity singing, high SPL input will result in undesirable distortion in the
output.
After performing setting changes, you could turn the protective cover 180
°
in either
direction to block the buttons from being accidentally adjusted.
2. Making changes to Battery selection:
Use UP or DOWN button to go to the Battery selection page.
Press UP or DOWN button to move the cursor to either NiMH ( rechargeable battery ) or
AKLN ( Alkaline battery ) position.
When the desired battery has been selected, it will be automatically saved and stored in the
memory.
Remark : "NiMH" must be selected when rechargeable battery is being
used. Never select "AKLN" ( Alkaline ) when transmitter is intended for
charging as Alkaline battery can not be charged ! Wrong selection of
battery will cause battery sensing electronics to display wrong information
and mislead charging status.
1.Making changes to Channel:
Use UP or DOWN button to go to the CHANNEL/ FREQUENCY page.
The cursor will flash to allow changes to be made. Pressing UP or DOWN button will increase
or decrease the channel number. The corresponding frequency will change accordingly.
When a desired channel is selected, it will be automatically saved and stored in the memory.
CH: 086
746.250
7
8
8
9
11
