5
NDR-3900
Dual-Channel Auto-Sync Diversity Receiver
Audio output connection
Balanced output
: XLR connector provides balanced audio output signal from this jack to the
mixer/amplifier.
Use an audio output cable with “XLR” or “Cannon” connector, connect one
end to the balanced output jack of the receiver, and the other end to the “
MIC IN
” jack of the
mixer/ amplifier.
Unbalanced output
: ¼” PHONE PLUG connector provides unbalanced audio output
signal from this jack to the mixer/amplifier.
Use
an audio output cable with ¼” PHONE
PLUG connectors. Connect one end from the unbalanced output jack of the receiver, and
the other end to the “
LINE IN
” jack of the mixer/ amplifier.
MIC/LINE output impedance level switch
1.
When connecting to the
LINE /AUX IN
of a mixer/amplifier, switch to RIGHT
“
LINE
”
position
. DO NOT use the “
MIC
” position as they may not deliver a sufficient high output
level.
2.
When connecting
to the “
MIC IN
” jack of a mixer/amplifier, switch to LEFT “
MIC
” position.
Overload distortion may occur at the wrong level position.
MIC/LINE
output level switch
►►
MIC
level for connecting to MIC IN.
LINE
level for connecting to LINE IN or AUX IN
