-3-
Adjusting VOLUME level
The setting can be made right on the main menu
.
Press UP or DOWN to choose a new level. After the setting is made, the data will be
automatically saved.
Adjusting SQUELCH level
First, press "SET" till the display shows
.
Then press UP or DOWN to choose a new level. After the setting is made, the data will be
automatically saved.
Receiver installation
For best operation, the receiver should be at least 1m above the
ground and 1m away from a wall or metal surface to minimise
reflections. The transmitter should also be at least 1m away from
a wall or metal surface to minimise reflections. The transmitter
should also be at least 1m away from the receiver. Keep
antennas away from noise source such as motors, automobiles,
neon light as well as large metal objects.
Audio output connection
There are two audio outputs on the back of the receiver, Mic-level balanced and Line-
level unbalanced. Use shielded audio cable for the connection between the receiver and
the amplifier/mixer. If the amplifier/mixer has a 1/4"(6.3mm) phone jack, connect a cable
from the 1/4"(6.3mm) unbalanced audio output from the receiver to the amplifier/mixer. If
the amplifier/mixer has an XLR input, connect a cable from the balanced XLR audio
output from the receiver to the amplifier/mixer input.
Rack mounting
The receiver can be cabinet-mounted by either one or two units. If only one receiver is to
be mounted, an optional kit is available and it's installed as shown in Fig 1. If two
receivers are to be mounted, they can be assembled by another kit and installed as
shown in Fig 2.
(Fig 1)
(Fig 2)
