-
2
-
10. Antenna B socket (TNC)
11. Balanced audio output
12. Unbalanced audio output
13. Antenna A socket (TNC)
14. DC in
Changing CHANNEL / FREQUENCY
First, press "SET" till the display shows
.
Then press UP or DOWN to select a new channel. As the channel changes, the
frequency changes accordingly, too. After the setting is made, the data will be
automatically saved.
CHANNEL scanning
For an interference-free operation, a cleaner channel might be necessary if the current
one receives too much interference. Before scanning, the transmitter must be switched off.
First, press "SET" till the display shows
.
Then press UP or DOWN to go to the next clean channel.
After the setting is made, the data will be automatically saved.
CHANNEL SYNCHRONISING of the receiver and microphone
a. Limit the distance between the receiver and transmitter within 30cm.
b. Align both infrared areas
c. To change the receiver’s channel, please press the synchronising button of the microphone.
The microphone's LED will grow to imply synchronising signal transmitted and
will appear on the receiver's LCD, which means the receiver has been
successfully synchronised.
d. To change the microphones channel, please press the SYNC button of the receiver and
will appear on the receiver’s display, followed by
indicating data transferred.
