ISO 9001 / ISO 14001 / OHSAS 18001
-4-
UHF
handheld transmitter (Q-818)
Parts and functions
1. Cartridge
2. Battery weak/power LED
3. Power switch
4. Battery compartment
5. Bottom cap
Battery installation & indicator
This transmitter
requires 2 x AA batteries to operate.
To install, remove the battery cover and slide the batteries into the battery compartment &
replace the battery cover.
Note
: Batteries contain a corrosive acid that may leak and damage the microphone when
stored for a long period. Batteries should be removed from the microphone before storing
without use for more than 4 weeks.
When the microphone is switched ON, a red LED
will blink once to indicate the batteries
installed are in good condition.
If the LED remains illuminated the batteries have expired
and require replacement.
2 3
4
5
1
