17
DWR-5420/DH-5400/DB-5400
Dual-Channel Three Redundancy Digital Wireless Microphone System
Battery type setting
1
Use
MENU
button to go to the BATTERY TYPE page.
2
Press and hold
SET
button until
NiMH
or
AKLN
flashes to denote readiness for setting.
3
Press
SET
button to select either
NiMH
(rechargeable battery) or
AKLN
(alkaline battery).
4
6 seconds after selecting a battery type, it will be automatically saved and the type will not
change after reboot until the setting is changed again.
Important:
◼
To avoid dangers from overcharging, please turn off the transmitter before charging
◼
Do not charge primary batteries such as zink-carbon and alkaline batteries to avoid risks of
leakage or dangers.
◼
Be sure to install the batteries by correct polarity to prevent device damages due to short
circuit.
◼
Batteries of the same brand offer better quality consistency. Do not use batteries of different
brands as possible.
◼
Do not mix new, old and different-brand batteries to prevent short circuit or malfunction.
◼
If the transmitter will not be used for a long period of time, the batteries should be removed
and kept dry to avoid leakage and damage to the device due to battery self-discharge.
◼
If the battery leaks, cracks or deforms, stop using and take it out immediately.
