SLIDE.80
110-230Vac / 24Vdc
Cod.
151116
CHIAROSCURO SAS di Girelli Marco & C.
C.So General A.Cantore 23 - 38061 Ala (TN) Italy
P.I. IT01527050221
Pag. 14di 16
8.
M
AINTENANCE
8.1
Periodical maintenance
8.2
Special maintenance
9.
DRAWBACKS
AND
ANOMALIES
Faults List :
E.D. has to keep updated this list making maintenance operations
In cases of error contact our Customer Care service reporting model, product code and serial number (look
at pic.3.1. Device Label).
In cases of defects and/or malfunctioning , don’t try to repair the device but contact our Customer Service
reporting model, product code and serial number (look at pic.3.1. Device Label).
All the operations described in the next paragraphs has to be carry out with the device turned off (switch
attributable to device OFF position).
Exploiter : Clean periodically the device casing using a soft cloth with moisten with neutral and not
aggressive soaps and wipe up with a dry soth.
To maintain clean and without obstacles the shutters moving area.
Electromechanical Dealer : Verify the tension of belt.
Adjust and regulate possible beddings of the shutters.
Exploiter : Contact the Electromechanical Dealer in of breakages or malfunctioning
Electromechanical Dealer : Find the malfunction and, if it’s necessary contact our Customer Care
reporting model, product code and serial number (look at pic.3.1. Device Label).
Use the form “service request – supplies” at page 26
Date
Operator
Drawback
Possible cause
If the service intervention didn’t solve the problem stop all the operations and contact the Customer
Care.
It’s hardly forbidden to open the case of the device except written authorizations of CHIAROSCURO
SAS. Not respecting this rule will cause the immediately decay of warranty.
