Chevrolet VENTURE 2004 Скачать руководство пользователя страница 25

Страница: 25 / 516

2. Make sure the bucket

seat is angled so that
the front hooks
clear the floor pins.

If the front legs are not attached correctly, the rear
legs will not attach to the rear set of floor pins.

If the front latches are not attaching correctly, check
that the seat is in the full rear position.

3. Firmly push the rear hooks onto the rear floor pins

by pushing down the rear of the seat.

4. Try to raise the seat to check that it is locked down.

5. Lift the seatback recliner lever or pull the nylon

strap on the back of the seat and raise the
seatback until it locks upright.

6. Push and pull on the seatback to make sure that it

is locked in place.

1-19

Содержание VENTURE 2004





































































































































































































































































































































































































































































































































Результаты поиска

Содержание VENTURE 2004

Отзывы:

Похожие инструкции для VENTURE 2004

Бренды по названию

Популярные бренды

Chevrolet VENTURE 2004, Руководство пользователя

Результаты поиска

Содержание VENTURE 2004

Отзывы:

Похожие инструкции для VENTURE 2004

Бренды по названию

Популярные бренды