Chevrolet VENTURE 2004 Скачать руководство пользователя страница 20

Страница: 20 / 516

If the front latches are not attaching correctly, check
that the seat is in the full rear position.

3. Firmly push the rear hooks onto the rear floor pins

by pushing down on the rear of the seat.

4. Try to raise the seat to check that it is locked down.

5. Lift the seatback recliner lever or pull the nylon

strap on the back of the seat and raise the
seatback until it locks upright.

6. Push and pull on the seatback to check that it is

locked.

7. If you have the 40/60 seat, attach the mini-buckle

so that the safety belt is ready for use when a
passenger uses the seat.

The buckle reattaches by pushing the latch into the
buckle until the red center pops out again.

Repeat these steps for the other section of the split
bench seat.

Bucket Seats

If your vehicle has the bucket seats, the seatbacks can
be folded down or reclined. The seats can also be
adjusted forward or rearward and removed.

One of the bucket seats may be equipped with a built-in
child restraint. See Built-In Child Restraint on page 1-81.

Adjusting the Bucket Seats

There are two adjustment levers on each seat to adjust
the seat forward or rearward.

One is located below the center, in front of the bucket
seats.

1-14

Содержание VENTURE 2004





































































































































































































































































































































































































































































































































Результаты поиска

Содержание VENTURE 2004

Отзывы:

Похожие инструкции для VENTURE 2004

Бренды по названию

Популярные бренды

Chevrolet VENTURE 2004, Руководство пользователя

Результаты поиска

Содержание VENTURE 2004

Отзывы:

Похожие инструкции для VENTURE 2004

Бренды по названию

Популярные бренды