Chevrolet Trailblazer Owner Manual (GMNA-Localizing-U.S./Canada-
16263960) - 2023 - CRC - 2/23/22
206
Driving and Operating
Warning (Continued)
the camera
’
s view; or when the
vehicle in front or oncoming traffic
causes additional environmental
obstructions, such as road spray. ACC
performance is limited under these
conditions.
.
On slippery roads where fast changes
in tire traction can cause excessive
wheel slip.
.
With extremely heavy cargo loaded in
the cargo area or rear seat.
.
When towing a trailer.
5
:
Press to turn the system on or off. The
indicator turns white on the instrument
cluster when ACC is turned on.
RES+ :
Press up briefly to resume the
previous set speed or to increase vehicle
speed if ACC is already activated. To increase
speed by about 1 km/h (1 mph), press RES+
up briefly. To increase speed to the next
5 km/h (5 mph) mark on the speedometer,
hold RES+.
SET
−
:
Press down briefly to set the speed
and activate ACC or to decrease vehicle
speed if ACC is already activated. To
decrease speed by about 1 km/h (1 mph),
press SET
–
down briefly. To decrease speed
to the next 5 km/h (5 mph) mark on the
speedometer, hold SET
–
.
*
:
Press to disengage ACC without erasing
the selected set speed.
[
:
Press to select a following gap setting
for ACC of Far, Medium, or Near.
The speedometer reading can be displayed
in either English or metric units. See
. The increment
value used depends on the units displayed.
Switching Between ACC and Regular
Cruise Control
To switch between ACC and regular cruise
control, press and hold
*
*. A Driver
Information Display (DIC) message displays.
See
ACC Indicator
Regular Cruise Control
Indicator
When ACC is engaged, a green
o
indicator
will be lit on the instrument cluster and the
following gap will be displayed. When the
regular cruise control is engaged, a green
J
indicator will be lit on the instrument
cluster; the following gap will not display.
When the vehicle is turned on, the cruise
control mode will be set to the last mode
used before the vehicle was turned off.
It is recommended to switch from ACC to
regular cruise control only, when there are
no vehicles ahead of your vehicle.