Chevrolet Trailblazer Owner Manual (GMNA-Localizing-U.S./Canada-
16263960) - 2023 - CRC - 2/23/22
204
Driving and Operating
5
:
Press to turn the cruise control system
on and off. A white indicator comes on in
the instrument cluster when cruise is
turned on.
*
:
Press to disengage cruise control
without erasing the set speed from memory.
+RES :
If there is a set speed in memory,
press up briefly to resume that speed or
press and hold to accelerate. If cruise control
is already active, use to increase vehicle
speed.
−
SET :
Press down briefly to set the speed
and activate cruise control. If cruise control
is already active, use to decrease vehicle
speed.
Setting Cruise Control
If
5
is on when not in use,
−
SET or +RES
could get bumped and go into cruise when
not desired. Keep
5
off when cruise is not
being used.
To set a speed:
1. Press
5
to turn the cruise system on.
2. Get to the speed desired.
3. Press
−
SET down and release. The desired
set speed briefly appears in the
instrument cluster.
4. Remove your foot from the accelerator
pedal.
The cruise control indicator on the
instrument cluster turns green after cruise
control has been set to the desired speed.
See
Resuming a Set Speed
If the cruise control is set at a desired speed
and then the brakes are applied or
*
is
pressed, the cruise control is disengaged
without erasing the set speed from memory.
Once the vehicle speed reaches about
40 km/h (25 mph) or more, briefly press
+RES up. The vehicle returns to the previous
set speed.
Increasing Speed While Using Cruise Control
If the cruise control system is already
activated:
.
Press and hold +RES up until the vehicle
accelerates to the desired speed, then
release it.
.
To increase the speed in small increments,
briefly press +RES up. For each press, the
vehicle goes about 1 km/h (1 mph) faster.
The speedometer reading can be displayed
in either English or metric units. See
. The increment
value used depends on the units displayed.
Reducing Speed While Using Cruise Control
If the cruise control system is already
activated:
.
Press and hold
−
SET down until the
desired lower speed is reached, then
release it.
.
To slow down in small increments, briefly
press
−
SET down. For each press, the
vehicle goes about 1 km/h (1 mph) slower.
The speedometer reading can be displayed
in either English or metric units. See
. The increment
value used depends on the units displayed.
Passing Another Vehicle While Using Cruise
Control
Use the accelerator pedal to increase the
vehicle speed. When you take your foot off
the pedal, the vehicle will slow down to the
previous set cruise speed. While pressing the
accelerator pedal or shortly following the
release to override cruise control, briefly
pressing
−
SET will result in cruise control set
to the current vehicle speed.