Chevrolet SS Sedan Owner Manual (GMNA-Localizing-U.S.-10122752) -
2017 - crc - 8/31/16
202
Infotainment System
2. Say
“
Dial
”
or
“
Call
”
and then
say the name tag. For example
“
Call John at Work.
”
Once connected, the person called
will be heard through the audio
speakers.
Using the
“
Digit Dial
”
Command
This allows a phone number to be
dialed by entering the digits one at
a time.
1. Press
b
/
g
. The system
responds
“
Please say a
command,
”
followed by a tone.
2. Say
“
Digit Dial.
”
3. Say each digit, one at a time,
to dial. After each digit is
entered, the system repeats
back the digit it heard followed
by a tone. After the last digit
has been entered, say
“
Dial.
”
If an unwanted number is repeated
back, say
“
Clear
”
to clear the last
number.
Once connected, the person called
will be heard through the audio
speakers.
Using the
“
Re-dial
”
Command
1. Press
b
/
g
. The system
responds
“
Please say a
command,
”
followed by a tone.
2. After the tone, say
“
Re-dial.
”
The system dials the last
number called from the
connected cell phone.
Once connected, the person called
will be heard through the audio
speakers.
Clearing the System
Unless information is deleted out of
the vehicle Bluetooth system, it will
be retained. This includes phone
pairing information. For directions
on how to delete this information,
see
“
Deleting a Paired Phone/
Device.
”
Text Messaging
For vehicles equipped with
Bluetooth capability, the system,
if equipped with text messaging, can
display text messages, play back a
message over the audio system,
and send a predefined message.
Not all phones support all functions
and work with Bluetooth. The radio
only supports the receipt of SMS
text messages. A request may need
to be accepted on the phone or
some phone settings may need to
be changed to allow text messaging
to function. See the cell phone
manufacturer
’
s user guide.
Using Text Messaging