Chevrolet Sail U-VA 2014, Руководство пользователя

Страница: 21 / 208

Each transmitter must be programmed
to prevent the vehicle from unlocking
with other transmitters.
Only RKE transmitters programmed to
this vehicle will work. If a transmitter is
lost or stolen, a replacement can be
purchased and programmed through
your CHEVROLET retailer. When the
replacement transmitter is programmed
to this vehicle, all remaining trans-
mitters must also be reprogrammed.
Any lost or stolen transmitter will no
longer work once the new transmitter is
programmed.
Each vehicle can have up to four
transmitters programmed to it.
Transmitter Battery Replacement
If the LED fails to illuminate or the
range is noticeably diminished, it is an
indication that a new battery is needed.
1. Remove the screw from the back of
the transmitter cover.
2. Open the transmitter cover.
HEX0164
Note
Replace with CR1616 battery or
equivalent.
3. Pull the transmitter out of the cover
and remove the label carefully, then
keep it in the clean place.
4. Remove the old battery. Prevent the
circuit board from contacting other
components.
5. Install the new battery. Make sure
that negative (-) side faces towards
the base.
6. Stick the label and put the transmit-
ter in the cover.
7. Install the transmitter cover.
8. Check the operation of the
transmitter.
Caution
Do not touch the battery surface with
your fingers. Otherwise, it will
shorten the life of battery.
17 Keys, Doors and Windows
Note
If Unlock button is pressed and door is
not opened within 30 seconds, doors
will be locked automatically.