Chevrolet SAIL Diesel, Руководство пользователя

Страница: 123 / 214

BULB REPLACEMENT
Caution
Halogen bulbs contain pressurized
gas. Always handle halogen bulbs
with care and dispose off them
properly.
— Wear eye protection during
handling of bulb.
—
Protect the bulb to avoid
abrasion and scratches.
—
When the bulb is illuminated and
not in a sealed installation,
protect it from contact with
liquids.
—
Only illuminate the bulb when it
is installed in a lamp.
— Replace any headlight that is
cracked or damaged.
—
Do not touch the glass shell of
replaced bulb with your fingers
or hands.
—
Keep the bulbs away from
children.
— Dispose off used bulbs with care.
Otherwise the bulbs can explode.
Headlights
Bulb replacement
1. Open the hood.
2. Disconnect the wiring harness
connector from behind the bulb.
3. Turn and remove the upper end of
the windshield washer reservoir.
(Only for the bulb on the left-hand
side.)
4. Remove the headlight cap.
5. Release the spring that retains the
bulb.
6. Remove the bulb.
HEX0127
7. Install a replacement bulb of the
same rating.
See Bulb Specifications on page
124.
8. Reinstall the bulb retaining spring.
9. Refit the headlight cap.
10. Turn and reinstall the upper end of
the windshield washer reservoir
(Only for the bulb on the left-hand
side.)
11. Connect the wiring harness conn-
ector.
Caution
Clean halogen bulbs with alcohol or
mineral spirits and a non-woven
cloth. Be sure not to touch the bulbs
with your bare hands.
Fingerprints on a halogen bulb can
drastically shorten the bulb's effect-
ive life.
Vehicle Maintenance 119