Black plate (30,1)
Chevrolet Impala Limited Owner Manual (GMNA-Localizing-U.S.-8215826) -
2015 - crc - 7/11/14
9-30
Driving and Operating
.
To decrease the vehicle speed in
smaller increments, briefly press
SET
−
. For each press, the
vehicle goes about 1.6 km/h
(1 mph) slower.
The speedometer reading can be
displayed in either English or metric
units. See
Instrument Cluster on
page 5-10
. The increment value
used depends on the units
displayed.
Passing Another Vehicle While
Using Cruise Control
Use the accelerator pedal to
increase the vehicle speed. When
you take your foot off the pedal, the
vehicle will slow down to the
previously set cruise speed. While
pressing the accelerator pedal or
shortly following the release to
override cruise control, briefly
pressing the SET
–
button will result
in cruise control set to the current
vehicle speed.
Using Cruise Control on Hills
How well the cruise control works
on hills depends upon the vehicle
speed, the load, and the steepness
of the hills. When going up steep
hills, you might have to step on the
accelerator pedal to maintain your
speed. When going downhill, you
might have to brake or shift to a
lower gear to keep your speed
down. If the brake pedal is applied,
the cruise control will disengage.
Ending Cruise Control
There are four ways to end cruise
control:
.
To disengage cruise control,
step lightly on the brake pedal.
.
Press
[
.
.
Shift the transmission to
N (Neutral).
.
To turn off the cruise control,
press
J
.
Erasing Speed Memory
The cruise control set speed
memory is erased from memory if
J
is pressed or the ignition is
turned off.
