Black plate (4,1)
Chevrolet Caprice Police Patrol Vehicle (GMNA-Localizing-U.S.-6067651) -
2014 - crc - 8/22/13
2-4
Keys, Doors, and Windows
the engine from outside the vehicle
using the RKE transmitter. See
Remote Vehicle Start on page 2-5
The buttons on the transmitter are
disabled when there is a key in the
ignition.
Programming Transmitters to
the Vehicle
The following procedure is for
programming additional transmitters
only. If all vehicle transmitters are
lost or no longer work, see your
dealer. A new key and transmitter
must be made prior to programming.
Option AMF is a package of six
keys and transmitters, including six
cut keys with integrated Remote
Keyless Entry. The transmitters are
not programmed.
Each transmitter, including the two
standard with the vehicle, must be
programmed at the same time by
the customer or by a dealer.
The remote transmitters must be
programmed separately for a
vehicle in the fleet.
A maximum of 8 keys can be
programmed for the vehicle with a
random key code. Vehicles with the
fleet key option (RPO 6E3 or 6E4)
may have an unlimited number of
keys learned for these options,
using the original master key.
When programming option AMF,
additional six RKE transmitters, the
original two vehicle transmitters
must also be reprogrammed at the
same time. A maximum of eight
RKE transmitters can be
programmed for a vehicle.
Programming the Key and
Transmitter
1. The six RPO AMF keys are
pre-cut at vehicle assembly. If a
key is separate from AMF, cut
the new key blank to match the
existing vehicle key.
2. Using the existing key, turn the
ignition to ON/RUN with the
engine off.
3. Turn the key to OFF/LOCK and
remove the key from the ignition.
4. Insert and turn the new key and
turn the ignition to ON/RUN
within 10 seconds of removing
the existing key.
The vehicle has now learned the
new key.
Battery Replacement
Replace the battery if the REPLACE
BATTERY IN REMOTE KEY
message displays in the DIC.