Black plate (30,1)
Chevrolet Caprice Police Patrol Vehicle (GMNA-Localizing-U.S.-6067651) -
2014 - crc - 8/22/13
10-30
Vehicle Care
6. Remove the trunk lining by
turning the securing pins
counterclockwise and pulling
down at the same time.
7. Lower the spare tire cover.
8. Turn the bulb socket
counterclockwise to remove it
from the rear lamp housing.
9. Pull the bulb straight out to
remove it from the bulb socket.
10. Push the new bulb into the
socket.
11. Push the bulb socket straight in
and turn it clockwise to lock it
into place.
12. Raise the spare tire cover.
13. Push the trunk lining securing
pins back into their holes.
14. Install the plastic trunk trim to
its original location.
15. Reinstall the plastic retaining
pins and hooks.
License Plate Lamp
To replace one of these bulbs:
Passenger Side Shown, Driver
Side Similar
1. Press the spring clip on the left
end of the lamp assembly to the
right to unlock the lamp
assembly.
2. Pull down on the lamp assembly
to remove it from the fascia.
