Chevrolet C6H042, Руководство пользователя

Страница: 69 / 324

2-26
Clutch Brake (Vehicles with
Non-Synchronized Transmission)
A clutch brake is used to stop transmission input shaft
rotation so that FIRST (1) or REVERSE (R) gear
selection can be initiated when the vehicle is at a
standstill and the engine is idling.
When using the clutch brake, disengage the clutch pedal
and shift the transmission into either FIRST (1) or
REVERSE (R) gear. If the tooth
-
butting occurs
between the clutching teeth, re
-
engage the clutch while
applying light pressure to the shift lever. This will
provide for a smooth shift into either FIRST (1)
or REVERSE (R) gear.
NOTICE:
After engaging FIRST (1) or REVERSE (R) gear,
do not use the clutch brake for upshifting and
downshifting. To do so will shorten the service life
of the clutch brake and gear selection shift efforts
may be increased.
Parking
CAUTION:
If you don’t park your vehicle properly, it can
roll. If you’ve left the engine running, it can move
very quickly. You or others could be injured.
To be sure your vehicle won’t move, even when
you’re on level ground, follow the steps below.
Two-Speed Rear Axle
1. With the engine running, shift the two
-
speed rear
axle into low. To be sure it’s in low, you’ll need to
move the vehicle in gear just a little.
2. Hold the regular brake pedal down with your
right foot.
3. Apply the parking brake.
4. Shift the transmission to neutral or PARK (P).