Chevrolet 2013 Spark, Руководство пользователя

Страница: 94 / 356

Black plate (4,1)
Chevrolet Spark Owner Manual - 2013 - 1st - 5/2/12
5-4 Instruments and Controls
OFF: Turns the rear wiper off.
=
(Rear Washer): Sprays washer
fluid on the rear window. The control
returns to its starting position when
released.
The rear window wiper will stop
when the transmission is in
N (Neutral) or the liftgate is open.
It also stops for 10 seconds when
the transmission is shifted from
N (Neutral) to other gears.
The windshield washer reservoir is
used for the windshield and the rear
window. Check the fluid level in the
reservoir if either washer is not
working. See
Washer Fluid on
page 10 ‑ 17 .
Clock
Radio Without Touchscreen
The infotainment system controls
are used to access the time and
date settings through the menu
system. See
Operation on page 7 ‑ 5
for information about how to use the
menu system.
Setting the Time and Date
1. Press
H
or CONFIG button and
select Time and Data Settings.
2. Select Set Time or Set Date.
3. Turn the Menu Tune knob to the
desired value.
4. Press the Menu Tune knob to
select the value.
5. Turn the Menu Tune knob to
change the desired value.
6. To save and return to the Time
Settings menu, press
/
BACK
button at any time.
Setting the 12/24 Hour Format
1. Press the
H
or CONFIG button
and select Time and Date
Settings.
2. Select Set Time Format.
3. Press the Menu Tune knob to
select the 12 hour or 24 hour
display format.
Setting the Month and Day
Format
1. Press the
H
or CONFIG button
and select Time and Date
Settings.
2. Select Set Date Format.
3. Turn the Menu Tune knob to the
desired setting.
4. Press the Menu Tune knob to
select the DD/MM/YYYY (day/
month/year), MM/DD/YYYY
(month/day/year), or YYYY/MM/
DD (year/month/day) display
format.
Radio With Touchscreen
The infotainment system controls
are used to access the time and
date settings through the menu
system. See
Operation on page 7 ‑ 5
for information about how to use the
menu system.
Setting the Time and Date
1. Press
D
, and then press
settings.