Chevrolet 2013 Impala, Руководство пользователя

Страница: 154 / 350

Black plate (6,1)
Chevrolet Impala Owner Manual - 2013 - crc - 8/27/12
7-6 Infotainment System
Radio
AM-FM Radio
Radio Data System (RDS)
The radio may have RDS. The RDS
feature is available for use only on
FM stations that broadcast RDS
information. This system relies upon
receiving specific information from
these stations and only works when
the information is available. While
the radio is tuned to an FM-RDS
station, the station name or call
letters display. In rare cases, a radio
station could broadcast incorrect
information that causes the radio
features to work improperly. If this
happens, contact the radio station.
4
(Information) (RDS Features):
For vehicles with RDS features,
press
4
to display additional text
information related to the current
FM-RDS station. If information is
available, the song title information
displays on the top line of the
display and artist information
displays on the bottom line. When
information is not available,
“ NO
INFO ” displays.
Auto Text (RDS Features): If
additional information is available
for the current song being played,
Auto Text will automatically page/
scroll the information every
three seconds above the FAV
presets on the radio display. By
default, Auto Text is enabled.
To change the Auto Text setting:
1. Press MENU to display the radio
setup menu.
2. Press the softkey under AUTO
TXT tab on the radio display.
3. Press the softkey under the ON
or OFF tab on the radio display.
If
4
is pressed and the song title or
artist information is longer than what
can be displayed, the extra
information will page every
three seconds when Auto Text is
activated.
Finding a Station
BAND: Press to choose between
FM1, FM2, AM, or XM ™ (if
equipped) on the Radio with CD
(Base). Press to choose between
FM, AM, XM (if equipped) on the
Radio with CD (MP3).
f
(Tune): Turn to select radio
stations.
©
SEEK: Press to seek or scan
stations with a strong signal in the
selected band.
. To seek stations, press and
release
©
SEEK to go to the
previous station and stay there.
.
To scan stations, press and hold
©
SEEK for a few seconds until
the radio beeps once. The radio
goes to a station, plays for a few
seconds, then goes to the next
station. Press
©
SEEK again to
stop scanning.
. To scan preset stations in the
selected band, press and hold
©
SEEK for four seconds until a