Chevrolet 2011 Impala, Руководство пользователя

Страница: 36 / 392

Black plate (6,1)
Chevrolet Impala Owner Manual - 2011
2-6 Keys, Doors and Windows
/
(Remote Start): This button will
be on the RKE transmitter if you
have remote start.
To start the vehicle using the remote
start feature:
1. Aim the transmitter at the
vehicle.
2. Press and release
Q
, then
immediately press and
hold
/
for two to four seconds
or until the vehicle's turn signal
lamps flash. The doors will lock.
When the vehicle starts, the
parking lamps turn on and
remain on while the engine
is running.
The remote start feature provides
two separate starts per ignition
cycle, each with 10 minutes of
engine running time, or one start
with a time extension. The first start
must expire or be canceled to get
two separate 10-minute starts.
If it is the first remote start since the
vehicle has been driven, repeat the
previous steps, while the engine is
still running, to extend the engine
running time by 10 minutes from the
time you repeat the steps for remote
starting. The remote start running
time can be extended one time and
only after the first remote start.
After entering the vehicle during a
remote start, insert and turn the key
to ON/RUN to drive the vehicle.
The engine will shut off
automatically after 10 minutes,
unless a time extension has been
done or the vehicle's key is inserted
into the ignition switch and turned to
ON/RUN.
To manually shut off a remote start,
do any of the following.
. Aim the RKE transmitter at the
vehicle and press and release
the remote start button.
. Turn on the hazard warning
flashers.
. Turn the ignition switch out of
LOCK/OFF and then back to
LOCK/OFF.
After the engine has been started
two times, or one time with a time
extension, the vehicle's ignition
must be turned to ON/RUN using
the key before the remote start
procedure can be used again.
See
Ignition Positions on page 9 ‑ 17
for information regarding the ignition
positions on your vehicle.