Chevrolet 2011 Impala, Руководство пользователя

Страница: 334 / 392

Black plate (78,1)
Chevrolet Impala Owner Manual - 2011
10-78 Vehicle Care
6. Connect the red positive (+)
cable to the positive (+) terminal
location of the vehicle with the
dead battery. Use a remote
positive (+) terminal if the
vehicle has one.
7. Do not let the other end
touch metal. Connect it to the
positive (+) terminal location of
the vehicle with the good battery.
Use a remote positive (+)
terminal if the vehicle has one.
8. Now connect the black
negative ( − ) cable to the
negative ( − ) terminal location of
the vehicle with the good battery.
Use a remote negative (
− )
terminal if the vehicle has one.
Do not let the other end touch
anything until the next step.
The other end of the negative (
− )
cable does not go to the dead
battery. It goes to a heavy,
unpainted metal engine part or
to a remote negative (
− ) terminal
on the vehicle with the dead
battery.
9. Connect the other end of the
negative ( − ) cable at least 45 cm
(18 in) away from the dead
battery, but not near engine
parts that move. The electrical
connection is just as good there,
and the chance of sparks getting
back to the battery is much less.
10. Now start the vehicle with
the good battery and run the
engine for a while.
11. Try to start the vehicle that
had the dead battery. If it will
not start after a few tries, it
probably needs service.
Notice: If the jumper cables are
connected or removed in the
wrong order, electrical shorting
may occur and damage the
vehicle. The repairs would not be
covered by the vehicle warranty.
Always connect and remove the
jumper cables in the correct
order, making sure that the
cables do not touch each other
or other metal.
Jumper Cable Removal
A. Heavy, Unpainted Metal Engine
Part or Remote Negative ( − )
Terminal
B. Good Battery or Remote
Positive (+) Terminal and
Remote Negative (
− ) Terminals
C. Dead Battery or Remote
Positive (+) Terminal