Chevrolet 2011 Caprice Police Patrol Vehicle, Руководство пользователя

Страница: 111 / 366

Black plate (67,1)
Chevrolet Caprice Police Patrol Vehicle - 2011
Seats and Restraints 3-67
5. Pull the shoulder belt all the way
out of the retractor to set the
lock. When the retractor lock is
set, the belt can be tightened but
not pulled out of the retractor.
6. To tighten the belt, push down
on the child restraint, pull the
shoulder portion of the belt to
tighten the lap portion of the belt,
and feed the shoulder belt back
into the retractor. When installing
a forward-facing child restraint,
it may be helpful to use your
knee to push down on the child
restraint as you tighten the belt.
Try to pull the belt out of the
retractor to make sure the
retractor is locked. If the
retractor is not locked,
repeat Steps 5 and 6.
7. Before placing a child in the
child restraint, make sure it is
securely held in place. To check,
grasp the child restraint at the
safety belt path and attempt
to move it side
‐ to ‐ side and
back ‐ and ‐ forth. When the child
restraint is properly installed,
there should be no more than
2.5 cm (1 in) of movement.
If the airbag is off, the off indicator
in the passenger airbag status
indicator will come on and stay
on when the vehicle is started.
If a child restraint has been installed
and the on indicator is lit, see
“ If the On Indicator is Lit for a Child
Restraint ” under Passenger Sensing
System on page 3 ‑ 40 for more
information.
To remove the child restraint,
unbuckle the vehicle safety belt and
let it return to the stowed position.