Chevrolet 2007 TrailBlazer, Руководство пользователя

Страница: 280 / 572

How to Change the Video Format when in
the Auxiliary Mode
The auxiliary input video format is preset to NTSC.
In some countries, the video format may be in
the PAL system. To change the video format,
perform the following:
1. Press the display menu button.
2. Press the down arrow button to highlight the
Video Format option.
3. Press the enter button to select Video Format.
4. Press the right or left arrow button to select
the desired video format.
5. Press the enter button to accept the change.
Audio Output
Audio from the DVD player or auxiliary inputs may
be heard through the following possible sources:
•
Wireless Headphones
•
Vehicle Speakers
•
Vehicle wired headphone jacks on the Rear
Seat Audio system (if equipped)
The RSE system will always transmit the audio
signal by infrared to the wireless headphones,
if there is audio available. See “Headphones”
previously for more information.
The RSE system is capable of outputting audio to
the vehicle speakers by using the radio. The RSE
system may be selected as an audio source on the
radio if the RSE system power is on. Once the RSE
system is selected as an audio source on the radio,
adjust the speaker volume on the radio, if
necessary. If the RSE system power is not on, the
RSE system will not be an available source on the
radio. Refer to the radio information for the radio
that your vehicle has for more information.
The RSE system is capable of outputting audio to
the wired headphone jacks on the rear seat
audio system (if equipped). The RSE system may
be selected as an audio source on the rear
seat audio system if the RSE system power is on.
Refer to
Rear Seat Audio (RSA) on page 292
for more information.
280