Chevrolet 2007 TrailBlazer, Руководство пользователя

Страница: 263 / 572

To insert multiple CDs, do the following:
1. Turn the ignition on.
2. Press and hold the LOAD button for
two seconds.
A beep sounds and the indicator light, located
to the right of the slot, begins to flash and
MULTI LOAD # displays.
3. Once the light stops flashing and turns green,
INSERT CD # displays, load a CD. Insert the
CD part way into the slot, label side up.
The player pulls the CD in.
Once the CD is loaded, the indicator light
begins flashing again. Once the light stops
flashing and turns green, you can load another
CD. The CD player takes up to six CDs. Do
not try to load more than six.
To load more than one CD but less than six,
complete Steps 1 through 3. When finished loading
CDs, press the LOAD button to cancel the
loading function. The radio begins to play the last
CD loaded.
If more than one CD has been loaded, a number
for each CD displays.
Playing a Specific Loaded CD
For every CD loaded, a number displays. To play
a specific CD, first press the CD AUX button (if
not already in CD mode), then press the numbered
pushbutton that corresponds to the CD. A small
bar displays under the CD number that is
playing and the track number displays.
If an error displays, see “CD Messages” later in
this section.
CD
Z
(Eject): Press this button to eject CD(s).
To eject the CD that is currently playing, press
and release this button.
To eject multiple CDs, do the following:
1. Press and hold the CD eject button for
two seconds.
A beep sounds and the indicator light, located
to the right of the slot, begins to flash and
EJECT ALL displays.
2. Once the light stops flashing, REMOVE CD #
displays. The CD ejects and can be removed.
Once the CD is removed, the indicator light
begins flashing again and another CD ejects.
To stop ejecting the CDs, press the
eject button.
263