Chevrolet 2007 Silverado, Руководство пользователя

Страница: 536 / 688

Checking Brake Fluid
The brake fluid can be checked without taking off
the cap by looking at the brake fluid reservoir.
The fluid level should be
above MIN. If it is not,
have the brake
system checked to see
if there is a leak.
After work is done on the brake hydraulic system,
make sure the level is above the MIN but not
over the MAX mark.
What to Add
When you do need brake fluid, use only DOT-3
brake fluid. Use new brake fluid from a sealed
container only. See Recommended Fluids
and Lubricants on page 644.
Always clean the brake fluid reservoir cap and the
area around the cap before removing it. This
helps keep dirt from entering the reservoir.
{
CAUTION:
With the wrong kind of fluid in the brake
system, the brakes may not work well.
This could cause a crash. Always use the
proper brake fluid.
536