Chevrolet 2007 Silverado, Руководство пользователя, Страница: 219 / 688

Turn and Lane-Change Signals
The turn signal has two upward (for right) and
two downward (for left) positions. These positions
allow you to signal a turn or a lane change.
To signal a turn, move the lever all the way up or
down. When the turn is finished, the lever will
return automatically.
To signal a lane change, raise or lower the lever
for less than one second until the arrow starts
to flash. This will cause the turn signals to
automatically flash three times. It will flash
six times if tow-haul mode is active. Holding the
turn signal lever for more than one second
will cause the turn signals to flash until you
release the lever. The lever will return by itself
when it is released.
An arrow on the
instrument panel
cluster will flash in the
direction of the turn
or lane change.
As you signal a turn or a lane change, if the
arrows flash more quickly than normal, a signal
bulb may be burned out and other drivers will not
see your turn signal.
If a bulb is burned out, replace it to help avoid an
accident. If the arrows do not go on at all when
you signal a turn, check for burned-out bulbs and a
blown fuse. See Fuses and Circuit Breakers on
page 618.
219